First-virtual-communications Voyager 3000 Instrukcja Użytkownika Pobierz pdf (Strona 70)

Voyager 3000 User Guide

5-6

SCSI Reset at Power-Up Setting

1 Press ENT for two seconds for the Main Menu.

2 Press t or s to select Edit SCSI Reset at Power-up

and press ENT.

Edit SCSI Reset

at Power-up ..

3 Press ENT for two seconds to change from enable to

disable or vice versa.

Disable SCSI Reset

at Power up?

The controller must be reset (e.g., by powering-off then on again, by executing "Reset This

Controller" via LCD interface, etc.) for this to take effect.

Sequential Drive Spin-Up Setting

To prevent overloading the power supply when several drives turn on at the same time, the

VOYAGER 3000 can sequence the drives to start spinning in succession at five seconds

interval. This is not necessary with the VOYAGER 3000 Power Supply Units

To use this option:

1 Press ENT for two seconds for the Main Menu.

2 Press t or s to select Edit Drive Spin-up and press

ENT.

Edit

Drive Spin-up ..

3 Press ENT for two seconds to change from enable to

disable or vice versa.

Disable Drive

Disk Spin-up ?

The controller must be reset (e.g., by powering-off then on again, by executing "Reset This

Controller" via LCD interface, etc.) for this to take effect.

Data Cache Setting

1 Press ENT for two seconds for the Main Menu.

2 Press t or s to select Edit Data Cache and

press ENT.

Edit

Data Cache ..

3 Press ENT for two seconds to change from enable to

disable or vice versa.

Disable

Data Cache ?

The controller must be reset (e.g., by powering-off then on again, by executing Reset This

Controller via LCD interface, etc.) for this to take effect.

Viewing Connected Drives

1 Press ENT for two seconds for the Main Menu.

2 Press t or s to select View SCSI Drives and press

ENT.

View

SCSI Drives ..

1 2 ... 65 66 67 68 69 70 71 72 73 74

Komentarze do niniejszej Instrukcji

Brak uwag

First-virtual-communications Voyager 3000 Instrukcja Użytkownika Strona 70

Komentarze do niniejszej Instrukcji